Hemera

Acrylic Stamp Holders

Please read the DESCRIPTION for details on shank sizes for this font

For fonts on 1/4" shanks

For fonts on 5/16" shanks

For fonts on 1/2" shanks

Click the image you want to add to your cart. You will be taken to its listing page.

5mm and 2.5mm

7.5mm and 3.75mm

2.5mm Uppercase

10mm and 5mm

2.5mm Uppercase

Acrylic Stamp Holders

For fonts on 1/4" shanks


Hemera Outline

Click the image you want to add to your cart. You will be taken to its listing page.

5mm and 2.5mm

7.5mm and 3.75mm

10mm and 5mm

Individual Symbols

For fonts on 5/16" shanks

  • DESCRIPTION
  • RECOMMENDATIONS
  • DISCLAIMER
  • WARRANTY
  • REVIEWS

  • A sophisticated vintage Victorian era fonts, inspired from the old advertising and classic sign back in circa 1800 - 1900s. Perfectly fit for your vintage vibes and classic touch on any stamped works of art, Hemera II will add that flair for the dramatic you're looking for!

  • The uppercase is significantly larger than the lowercase, and this is by design from the foundry.
  • The UPPERCASE is large and swirly. We are calling this the "ALTERNATE" set because the "lowercase" looks like uppercase letters.
  • The LOWERCASE is called "UPPERCASE" in this set because the letters are all uppercase letters.
  • The full set of this font would be called: Alternate 01, Uppercase, Numbers, Symbols.
  • The Alternate set comes in the following sizes: 5mm, 7.5mm and 10mm.
  • The Uppercase of this set comes in the following sizes: 2.5mm, 3.75mm, 5mm
  • The Numbers and Symbols are sized to go with the UPPERCASE set, NOT the Alternate set.
  • The Symbol set comes with (03) stamps: ? ! &



My two cents:


  • In my "Four Categories of Fonts" blog post, I would consider this font to fall into the FUN category. 
  • This font comes in two styles: Regular and Outline
  • They are sized the same way, so all descriptions and sizing for Hemera also apply to Hemera Outline
  • This font is VERY thick lined, and while crafted to work in all metals, I do not recommend the 7.5mm and 10mm sets for stainless steel as it will be very difficult to fill in color.
  • That being said, I had a much easier time coloring in the Hemera Outline sets in 7.5mm and 10mm in stainless steel (as opposed to regular Hemera).
  • The widest part of the 10.5mm Hemera Alternate Uppercase letters may stamp with a bit of a wavy texture. This is by design. The texture creates more surface area in the stamped letter to encourage color to stay in the lines and not wipe out as easily. I mention this only because it has been brought to my attention that some choose not to color in their letters, and this wavy texture is visible when viewed close up.
  • Hemera and Hemera Outline are PERFECT for soft metals in all sizes!
  • This wide font is PERFECT for leather work!!
  • This font has a spooky, old timey feel to it, right? I'd find myself grabbing for it for all my witchy, spooky, haunting, Halloween themes, too! But don't be afraid to try it as a Christmas theme!! And, as you can see from each of my examples, there are SO MANY ways this font can be used for ANY theme!! Check out the "educational Rockstar", "Ground Control to Major Tom", "Never go in against a Sicilian when Death is on the line", "Sometimes I have no idea what I'm doing" examples! No themes there, and these font sets are INCREDIBLE!


Stamp Sizing Info:


  • Smallest full set: 5mm Alternate 01, 2.5mm Uppercase, 2.5mm Numbers, 2.5mm Symbols
  • Medium full set: 7.5mm Alternate 01, 3.75 Uppercase, 3.75mm Numbers, 3.75mm Symbols
  • Largest full set: 10mm Alternate 01, 5mm Uppercase, 5mm Numbers, 5mm Symbols


Shank Sizing Info:


  • Shank sizes: Everything under 7.5mm comes on 1/4" shanks, with the exception of the R in the 5mm Uppercase set -- this one letter is on 5/16" shanks.
  • Shank sizes: The 7.5mm Alternate set comes on 3/8" shanks.
  • Shank sizes: The 10mm set comes on 1/2" blanks.

Amazing Keyrings and Charms:

  • I recommend Keychain Supply for all of your crafting keyring, charms, and birthstone needs! Link to their Etsy shop here: KeychainSupply

For Stainless Steel blanks:

  • I use all of the 22g, standard stainless steel from StampingBlanks.com and highly recommend this metal as a shiny, silver alternative. Be advised, to use stainless steel as your stamping blanks, you will need to have a solid base/stamping post and heavier mallet, which will require you to have different stamping supplies. Please watch my stainless steel stamping video here.

For Aluminum blanks & Cuffs:

  • Any aluminum on this site, in the form of Cuffs, is from Optimal Alloys. Any aluminum blank, especially the super adorable shapes, is from Birds Eye Blanks. We highly recommend getting the "polished" or "tumbled" blanks from these sites -- the reflection in the metal makes it much easier to see where you are stamping.

  • Our font metal stamps are programmed to be as close to the original typeset fonts as possible, although there may be slight variations from typeset to actual stamp based on a variety of programming and stamping needs. Please use the actual stamped images provided on our site and in each listing to see the stamped version.
  • The bigger and more detailed the design, the more difficult to stamp.
  • While our large, 12mm designs (also called Fat Bottom Shanks, or FBS) are RATED for steel, some very detailed FBS images are SUPER large, and some stainless steel stampers with lightweight hammers may find these large, detailed stamps very difficult to hammer in stainless steel and get a full impression.
  • Every image on this site that is hammered in stainless steel was hammered with a 2lb mallet, on a stamping post with no buffer between the anvil and the post. No sandbag, no pad, just the anvil on a solid stamping post going straight to the floor. No press here. Still having a tough time? 
  • Try these two resource videos:
  • Stainless Steel? I'd Hit That...Again
  • Is my stamp defective?

  • Our Blog section of the site has everything you need to know.

  • But here it is again, just to save you a few more clicks :)

  • All Font Fixation brand stamps are manufactured to be used on all metals. The product and listing photos on this website are primarily on 22g stainless steel from www.stampingblanks.com

  • Some metals are harder than others, for example butter or steak knives, and we do not recommend use on steel of this hardness level.

  • Our stamps are covered under warranty for 1 year from date of purchase and covers the original purchaser. Stamps purchased from "destash" or "second-hand" groups are not covered under warranty.

  • "Simple Dimple" stamps are manufactured on 1/4" shanks and are made to fit in most ring jigs. Simple Dimple designs usually fit on 1/4" wide cuffs, because all Simple Dimple design stamps are .5mm-5.5mm, and 1/4" cuffs are 6mm wide.

  • "Hefty Hitter" stamps are manufactured on 3/8" shanks.

  • "Fat Bottom Shanks" are stamps that are manufactured on 1/2" shanks. While these size design stamps are rated for stainless steel use, some of these designs are quite detailed and may require the "tilt-and-tap" method to get a full, solid impression. We always recommend using a solid surface that has force transferred directly to the floor (such as a stamping post), using a 2lb steel mallet, and not having any sandbag or such force deadening agent under your anvil. For more information on how to get better impressions, please see our YouTube video "Is My Stamp Defective".

  • Best impressions for larger and more detailed stamps are always in softer metals, like aluminum, brass, copper, pewter, and nugold. If you are a seasoned and skilled stainless steel stamper, you should have little-to-no difficulty with our larger/more detailed stamps in stainless steel. If you are a beginner stamper, we recommend you start with softer metals like those listed above, and as your skill level increases it should be easier to transition to stainless steel.

  • Want to see more examples or get tips on stamping? Request to join our Facebook group, "Font Fixation's Fabulous Friends" at www.facebook.com/groups/FontFixation -- Answer the three questions and we'll get you in the group!

  • If you have an error or defect in your stamp, please email FontFixation@gmail.com to get your stamp replaced under warranty, or for instructions on how to purchase a new individual stamp if out of warranty.

Customer Reviews

Based on 1 review Write a review

RELATED ITEMS


Electronic Gift Card
$10.00
FBS Acrylic Stamp Holder
$35.00